Image courtesy of Laser Tools Co. Inc.
Laser Tools Co. Inc. SE-10 Solar Energy Installation System
It's used to install the PV piles and bracketry that physically support solar cell panels and arrays.
The SE-10 Solar Energy Installation System is used to install the PV piles and bracketry that physically support solar cell panels and arrays. Installers use the SE-10 Solar Energy Installation System’s laser beam as a reference guide for straight pile alignment and consistent cutoff heights.
A new 4X32 Optical Scope and GDT250 retro-reflective target have both been added as accessories to the SE-10 Solar Energy Installation System. These new products speed the alignment of the laser beam over a 300-foot course. The 4 power Optical Scope helps align the laser beam on target and includes ranging graduations and calibration adjustments that don’t require special tools.
The GDT250 4” x 8” retro-reflective target contains micro spheres that reflect the laser light back upon the path of the incident light. This means that contractors can use the Optical Scope to position the laser beam on target and then use the reflected image on the spot target to verify target and position lock. The reflected laser light can be seen on the spot target over 300 feet away.
This laser can be used for various drilling operations, the scope and target, the laser beam can be seen at 300ft and greater in direct sunlight. Contractors such as Kiewit and Black and Veatch use this laser for solar installations and such.
For more information contact Laser Tools Co., Inc. at 12101 Arch St., Little Rock, AR 72206 or www.lasertoolsco.com. e mail info@lasertoolsco.com or call 501-562-0900 or FAX 501-562-0022
